Mini PTZ Dome Camera User Guide
Document 800-06705 - Rev A - 12/10
39
Preset Setup
z
Preset Number
[1~128]
Selects a Preset number to set up. If a selected
Preset is already defined, the camera moves to
the pre-defined position and parameters such as
Label and Cam Adjust show on the monitor. If a
selected Preset is not defined, UNDEFINED
shows on the monitor.
z
Clear Preset
[CANCEL/OK]
Deletes the data of the selected Preset.
z
Edit Preset Scene
Redefines the scene position of the selected
Preset.
z
Edit Preset Label
Edits the label of the selected Preset to show on
the monitor when the Preset runs. Maximum 10
alphanumeric characters are allowed.
z
Cam Adjust
[GLOBAL/LOCAL]
White Balance (WB) and Auto Exposure (AE) can
be set up independently for each Preset. There
are two modes: Global mode and Local mode. In
Global mode, WB and/or AE are set up
simultaneously for all Presets. Global WB/AE
parameters are set up in the Zoom Camera Setup
menu. In Local mode, WB/AE are set up
separately for each Preset. Local WB/AE
parameters are set up in each Preset setup
menu. The settings are activated when the
camera arrives at the Preset position. During jog
operation, Global WB/AE values should be
applied.
Note that Local mode settings have priority over
Global mode settings. Local WB/AE values do not
change when Global WB/AE values are change.
PRESET SETUP
------------------------
PRESET NO. 1
CLR PRESET CANCEL
<EDIT SCENE>
<EDIT LABEL> LABEL123
CAM ADJUST GLOBAL
BACK
EXIT
