Mini PTZ Dome Camera User Guide
Document 800-06705 - Rev A - 12/10
27
Preset
z
Function
Maximum 127 positions are programmable. Any number between 1 and 128 can be
assigned to a Preset, except 95. Preset 95 is reserved for entering the OSD menu.
Camera parameters such as White Balance, Auto Exposure and others can be set up
independently and each preset can have its own parameter values independently from
other presets. When setting up presets with a controller, Label should be blank and
"Camera Adjust" should be set to "GLOBAL" as the default. To change the parameters,
enter the OSD menu.
z
Setting Presets
Set Preset [1~128]
z
Running Presets
Go to Preset [1~128]
z
Deleting Presets
Use the OSD menu to delete Presets.
Swing
z
Function
This function causes the camera to move repetitively between two preset positions at
programmed speeds. When the Swing function is enabled, the camera moves from the
Preset assigned as the first point to the Preset assigned as the second point in a clockwise
direction. Then the camera moves from the Preset assigned as the second point to the
Preset assigned as the first point in a counterclockwise (CCW) direction.
Where the Preset assigned as the first point and the Preset assigned as the second point
are same, the camera turns on its axis by 360
°
in a clockwise direction and then it turns
back on its axis by 360
°
in a counterclockwise direction. The Swing speed is defined from
1
°
/sec to 180
°
/sec.
z
Setting Swings
To set a Swing, enter the OSD menu.
z
Running Swings
Method 1) <Run Pattern> [Swing no. + 10]
Method 2) <Go Preset> [Swing no. + 140]
For example, Run Swing 3: <Run Pattern> [13]
For example, Run Swing 3: <Go Preset> [143]
z
Deleting Swings
To delete a Swing, enter the OSD menu.
1st Preset
2nd Preset
CW
D
ire
cti
on
1
2
CC
W
Di
rec
tio
n
