www.honeybeecnc.com
40
Dalian
Honeybee
CNC
Equipment
Co.,Ltd.
Tel:
+86
411
85865100
Fax:+86
411
85866100
Chapter 8 Shape Library
8.1 Shape Library Setting
Input the size you want and get the work piece you need, you can custom shapes module.
When input the parameters, the cnc system will check the dimension and show warning info if
parameters wrong.
Notice
:
It is impossible for the control system to find all the error parameters; therefore, please enter correct
dimensions for parameters as much as possible.
When the parameters are entered, the control system will drawn the shape based on the entered
parameters, which is very helpful to graphic check.
In the system main menu, press
【
F6
】
to enter the LIBMINIT (Shapes Library), as picture 43.
Pic.43 Shape Library
8.2 Shapes Choose
This system provides 24 shapes, press direction key
【
↑
】【
↓
】【
←
】【
→
】
to move the highlight cursor
and choose the shapes you need, press
【
ENTER
】
to confirm.
8.3 Shape Parts Setting and Nest
After choose shape as above procedures, the system will remind you to input the parameters of shape
which you need., as picture 51.
