Honda WX15T, Manual

Page: 81 / 100

11-6
dummyhead dummyhead
CRANKCASE
PISTON
DISASSEMBLY/ASSEMBLY
Remove the piston (page 11-3) .
PISTON PIN CLIP (2)
CONNECTING ROD
PISTON
SECOND RING
INSTALLATION:
Install by the setting one end of the clip in the
piston groove, holding the other end with
needle nose pliers, and rotating the clip in.
Do not align the end gap of the clip [1] with the
cutout [2] in the piston bore.
MAKER MARK
[1]
TOP RING
PISTON RINGS
ASSEMBLY:
Install with the maker mark facing upward as
shown.
Do not interchange the top ring and the second
ring.
After assembly, check for smooth movement of
the piston ring.
Stagger the piston ring end gaps 120° apart.
Do not align with the piston pin.
OIL RING
(COMBINATION RING)
120°
120°
120°
PISTON PIN
[2]
TOP RING
SECOND RING
OIL RING
(COMBINATION RING)
10 mm (0.4 in)
10 mm (0.4 in)
(
Outer surface
)
(
Big and small end bearing
)