Honda TRX680FA, Owner'S Manual

Page: 78 / 242

69
Stalled Engine
How to Stop the Engine
Starting & Stopping the Engine
Basic Operation & Riding
If the engine stalls, shift into neutral (N) and restart the engine.
If you are unable to shift to neutral (N) from drive (D), you can restart
the engine by squeezing the front brake lever and pressing the start
button while the vehicle is stopped.
Do not press the throttle lever while starting in gear. Your ATV is
equipped with a start inhibitor system that will cut off the ignition if the
throttle is open while attempting to start in gear.
Once you have started the engine, release the front brake lever, then
apply throttle gradually.
Normal Engine Stop
The engine stop switch should normally remain in the RUN ( )
position even when the engine is OFF.
If your ATV is stopped with the engine stop switch OFF ( ) and the
ignition switch ON, the battery will discharge.
Emergency Engine Stop
To stop the engine in an emergency, use the engine stop switch. To
operate, slide the switch to the OFF (
) position.
To stop the engine, make sure the transmission is in neutral by checking
that the neutral indicator light is on, then turn the ignition switch OFF
(
).
０８／０４／２２ １０：３３：４２ ３２ＨＮ８６６０ ００７８