service after 10 years from the date of manufacture, regardless of their
condition or state of wear.
n
Winter Tires
If driving on snowy or frozen roads, mount all season tires marked “M+S”,
snow tires, or tire chains; reduce speed and maintain sufficient distance
between vehicles when driving. For winter tires, select the size and load
ranges that are the same as the original tires, and mount them to all four
wheels.
n
Tire Chains
Install tire chains on the front tires only. Because your vehicle has limited
tire clearance, we strongly recommend using the following chains:
Cable type: SSC Super Z LT-ZT735
Mount chains as tightly as you can and make sure that they do not touch the
brake lines or suspension.
Traction devices that are the wrong size or improperly installed can damage
your vehicle’s brake lines, suspension, body, and wheels. Stop driving if they
are hitting any part of the vehicle.
Using the wrong chains, or not properly installing chains, can damage the
brake lines and cause a crash in which you can be seriously injured or
killed.
Follow all instructions in this guide regarding the selection and use of tire
chains.
Tire Labeling
The tires that came on your vehicle have a number of markings. Those you
should be aware of are described below.
Here is an example of what each marking means:
P235/60R 18 102V
MAINTENANCE
148 |
• P: tire type (passenger vehicle)
• 235: tire width in millimeters
• 60: aspect ratio (tire section height as a
percentage of its width)
• R: tire construction code (radial)
• 18: rim diameter in inches
• 102: load index (code indicating
maximum load tire can carry)
• V: speed symbol (code indicating
maximum speed rating)
n
Tire Identification Number (TIN)
The tire identification number (TIN) is a
group of numbers and letters that look
like the following example. The TIN is
located on the sidewall of the tire.
n
Glossary of Tire Terminology
Cold Tire Pressure – The tire air pressure when the vehicle has been parked
for at least three hours or driven less than 1 mile (1.6 km).
Load Rating – The maximum load that a tire is rated to carry for a given
inflation pressure.
Maximum Inflation Pressure – The maximum tire air pressure that the tire
can hold.
Maximum Load Rating – The load rating for a tire at the maximum
permissible inflation pressure for that tire.
Recommended Inflation Pressure – The cold tire inflation pressure
recommended by the manufacturer.
Treadwear Indicators (TWI) – The projections within the principal grooves
designed to give a visual indication of the degrees of wear of the tread.
Example
Tire Size
Maximum
Tire
Identification
Number (TIN)
Tire Load
Maximum
Tire Pressure
Tire Size
Year
Week
DOT B97R FW6X 2209
DOT: This indicates that the tire meets all requirements
of the U.S. Department of Transportation.
B97R: Manufacturer’s identification mark.
FW6X: Tire type code.
22 09: Date of manufacture.
MAINTENANCE
| 149