3. Select Driver Assist System Setup.
4. Select Forward Collision Warning Distance
Models with Display Audio
Determine the warning timing. The vehicle must be in Park (P).
1. From the HOME screen, select Settings.
2. Select Vehicle. Then select Driver Assist System Setup.
3. Select Forward Collision Warning Distance.
4. Select Long, Normal, or Short.
5. Press BACK to exit the menu.
n
Turning the System On or Off
The CMBS
™
is turned on every time you start the engine, even if you turned
it off the last time you drove the vehicle.
Press and hold the button until the
beeper sounds to switch the system on
or off. When the CMBS
™
is off:
• The CMBS
™
indicator in the instrument panel comes on.
• A message on the driver information interface reminds you that the
system is off.
A beep sounds and a message appears on the Driver Information Interface.
The CMBS
™
indicator appears when the system is off.
n
Important Safety Reminder
CMBS is designed to reduce the severity of an unavoidable collision. It does
not prevent collisions nor stop the vehicle automatically. It is still your
responsibility to operate the brake pedal and steering wheel appropriately
according to the driving conditions.
DRIVING
152 |
Blind Spot Information System
*1
Alerts you to a detected vehicle in your left or right blind spot while driving
between 20 mph (32 km/h) and 100 mph (160 km/h). When the system detects
vehicles approaching from behind in adjacent lanes, the appropriate indicator
comes on for a few seconds, providing assistance when you change lanes.
When the system detects a vehicle
Blind Spot Information System Alert
Indicator: Located near the pillar on both
sides.
Comes on when:
• A vehicle enters the alert zone from behind to overtake you with a speed
difference of no more than 31 mph (50 km/h) from your vehicle.
• You pass a vehicle with a speed difference of no more than 12 mph (20 km/h).
Blinks and the beeper sounds when:
You move the turn signal lever in the direction of the detected vehicle. The
beeper sounds three times.
n
Changing Settings
Determine the warning type or turn the system off. The vehicle must be in
Park (P).
1. Select Home, then select Settings.
*1 - If equipped
DRIVING
| 153