INSTRUMENT PANEL
Indicators, gauges, and displays related to driving the vehicle.
Indicators briefly appear with each engine start and then go out. Red and amber
indicators are most critical. Blue and green indicators are used for general
information.
Malfunction Indicators
These are the most critical indicators. If they come on and stay lit while driving
or at any other time, there may be a problem. See your dealer for assistance.
U.S.
Canada
Brake system (red)
• Comes on when the brake fluid is low.
• Comes on if there is a problem with the brake system.
• The beeper sounds and the indicator comes on if you drive with
the parking brake not fully released.
• Comes on while driving - Make sure the parking brake is
released. Check the brake fluid level.
• Comes on along with the ABS indicator - Have your vehicle
checked by a dealer.
Brake system (amber)
• Comes on for a few seconds when you set the power mode to
ON, then goes off.
• Comes on if there is a problem with a system related to braking
other than the conventional brake system.
Have your vehicle checked by a dealer. With this indicator on, your
vehicle still has normal braking ability.
INSTRUMENT PANEL
28 |
Charging system
Comes on when the battery is not charging.
Supplemental Restraint System (SRS)
Comes on for a few seconds when you set the power mode to ON,
then goes off.
Comes on if a problem with any of the following is detected:
• Supplemental restraint system
• Side airbag system
• Side curtain airbag system
• Seat belt tensioner
Stays on constantly or does not come on at all - Have your vehicle
checked by a dealer.
Lane Keeping Assist System (LKAS)
There is a problem with the system.
Stays on constantly or does not come on at all - Have your vehicle
checked by a dealer.
Malfunction Indication Lamp (check engine light)
• Comes on when you turn the power mode ON, and goes off when
the engine starts If "readiness codes" have not been set, it blinks
five times before it goes off.
• Comes on if there is a problem with the emissions control system.
• Blinks when a misfire in the engine's cylinders is detected.
• Readiness codes are part of the on board diagnostics for the
emissions control systems.
• Comes on while driving - Have your vehicle checked by a dealer.
• Blinks while driving - Stop in a safe place where there are no
flammable objects. Stop the engine for 10 minutes or more, and
wait for it to cool down. Then, take your vehicle to a dealer.
Anti-lock Brake System (ABS)
There is a problem with the anti-lock brake system. Your vehicle still
has normal braking ability, but no anti-lock function. Have your
vehicle checked by a dealer.
INSTRUMENT PANEL
| 29