Honda NRX1800 2004, Owner'S Manual, Page: 181 / 245

1.1 lbf·ft (1.5 N·m , 0.15 kgf·m)
21 lbf·ft (28 N·m , 2.9 kgf·m)
172
If You Have a Flat Tire
Taking Care of the Unexpected
After installing the wheel, apply the
brake lever AND brake pedal several
times, then recheck both discs for
caliper holder to disc clearance. Do not
operate the motorcycle without
adequate clearance.
Check for free wheel rotation after
the brake lever and brake pedal are
released. Recheck the wheel if the
brake drags or if the wheel does not
rotate freely.
After installing the wheel, operate the
brake lever AND brake pedal several
times until you feel pressure. You
must restore pressure from BOTH the
lever AND the pedal because this
motorcycle is equipped with a new
braking system.
Verify proper brake operation before
riding.
Remove the protective tapes from the
front wheel.
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capability.
Tighten the fender plate bolts to the
specified torque:
Tighten the fender link bolts to the
specified torque:
9. 10.
11.
12.
03/04/01 10:08:58 31MEC600_181