−
57
Snow discharge chute
Manual adjustment
Discharge angle adjustment:
(ETS, EWS)
SNOW DISCHARGE
CHUTE
BOLT
COVER BOLTS
NUT
CHUTER
GEAR
PLATE
CHUTER SET PLATE
In the event that the snow discharge chute cannot be operated
electrically, open the battery cover and check for brown fuse. If the
fuse is not brown, adjust the snow discharge angle and distance as
follows:
Reinstall the chuter gear plate.
Reinstall the motor cover.
Retighten the chuter set plate
bolts.
Set the discharge chute at the
desired angle.
Raise the discharge chute enough
to bring the chuter gear out of
engagement with the motor gear.
Remove the chuter gear plate by
removing the two nuts.
Loosen the bolts that fasten the
chuter set plates.
Remove the four bolts securing
the motor cover.
Remove the bolt securing the
work light. Remove the motor
cover.
Check that the engine switch is in
the OFF position.
1.
2.
3.
4.
5.
6.
7.
8.
9.
04/11/26 17:10:35 3C768600_061
