−
−
−
−
19
Skid
To prevent accidental starting, turn the engine switch to the OFF
position and disconnect the spark plug cap.
Do not use the snowblower on rough or uneven surfaces with the
auger ground clearance set for hard snow or surfaces.
This may cause serious damage to the snow throwing mechanism.
At the auger:
At the scraper:
Factory pre-set clearance:
AUGER
SCRAPER
BOLTS
SKID
Adjust the skid for the auger housing ground clearance best suited to
your snow removal conditions.
Loosen the bolts and adjust the skid and scraper height according to
the road surface condition.
Be sure to tighten the skid and scraper bolts securely after making
adjustment.
Adjust the skid equally on both sides.
8.0
12.0 mm (0.31
0.47 in)
3.0
7.0 mm (0.12
0.28 in)
For use on uneven surfaces, lower the skid up to the bottom to obtain
the maximum scraper ground clearance.
Place the snowblower on a level surface and set the height adjust
lever in the middle position.
1.
2.
04/11/26 17:03:35 3C768600_023
