68
䖃
Any works on the vessel are very unstable and risky.
Installation/maintenance of transducer should be handled after landing
the vessel on ground or fixing the vessel at shipyard etc. If not, it may
cause serious injuries.
ᴾ
㻌
ͤ
Please refer to operation manual supplied with auto hull unit for auto hull unit.
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
Please be cautious when deciding the installation location with the consideration of
following points.
㻌
㻌
䞉
Choose the location where having less influence from air bubble, interference,
and noise condition.
㻌
Generally, it’s best to install it on the keel location.
㻌
㻌
㻌
㻌
㻌
䞉
Interference free condition.
䞉
No obstacles near the hull unit. (especially for bow side)
The obstacles at bow side cause bubbling and detection problem in addition to the
cut-off for ultrasonic beam.
㻌
1. Installation Location
TRANSDUCER INSTALLATION
㻌
䖃
Do not operate the electronic tools with wet hands.
㻌
It causes electronic shock.
㻌
In the case not being able to install
the sonar on the keel,
Shift location to aside.