2
㻌
㻌
ᴾ
2. HANDLING OF CABLE
䖃
Do not install the unit where rain or spray dashes hit directly.
㻌
It causes firing and heating.
㻌
㻌
䖃
Do not install the unit at heated places.
㻌
It causes the firing from the increase of internal temperature, injury, and
electronic shock.
㻌
㻌
䖃
Use the earthing.
㻌
Noise influence can be prevented by firm earthing.
㻌
㻌
䖃
Away from direct sun light.
㻌
It causes the difficulty of future vision and heat problem.
㻌
䖃
Be sure to use the specified power supply cable.
㻌
It causes firing and heating.
㻌
㻌
䖃
Do not leave the power plug after its removal.
㻌
It causes firing and heating if the plug gets wet.
㻌
㻌
䖃
Be sure to wire the cables for safety pilot.
㻌
The improper wiring causes the accident.
㻌
䈜
Do not put the heavy object on cables or bend cables excessively.
㻌
㻌
䖃
Do not disassemble or modify the cables.
㻌
It causes firing, heating, or electronic shock.
㻌
㻌
䖃
Do not use damaged cables.
㻌
It causes firing or electronic shock.
㻌
䖃
Do not pull out the cable when disconnecting the plug.
The cable damage causes firing and electronics shock.
ͤ
Be sure to hold and pull the plug itself for the removal.
䖃
Do not put any pressure on cables when installing the unit.
㻌
It causes line cut and shortage.
㻌
