background image

 

 

Thank you very much for purchasing our product. 

 

Please be sure to read this operating manual carefully and understand the contents 

before the actual operation in order to keep your safety. 

 
Please store this manual safely at the convenient place so that you can read it when 

needed.  

 
Please pass this manual to new owner when you resell or give this unit to someone 

else.  

 

We are not responsible for any physical injuries and property damages under 

product liability (PL) law by wrong usage or any other operations not described in 

this manual. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 

INTRODUCTION 

䞉䞉

Do not reproduce a part or all of contents described in this manual. 

Please understand that the unit may differ from the contents described in this 

manual due to the specification changes etc. 

Please inform us if you see errors and/or unclear descriptions in this manual.

DEFINITION OF SYMBOL MARK [CAUTION FOR SAFETY] 

Incur the accident resulting in the death or serious injuries unless 

you keep the descriptions. 

 

Be in danger of incurring the accident resulting in the death or 

serious wound unless you keep the descriptions. 

 

Be in danger or incurring the slight wound to human or damage to 

other physical property unless you keep the descriptions. 

 

Prohibited 

 

Must-follow 

Summary of Contents for Hondex HE-773-III-Di


























































































Reviews: