Servicing Your Honda
117
Rear Fender Cover Removal
Refer to
Important Safety Precautions
on page 103.
The rear fender cover must be removed for battery, fuse
maintenance and to access the owner’s manual, air pressure gauge,
gear change tool, tool kit and fuse puller.
Removal
1. Remove the seat (page 114).
2. Unhook the rubber strap (1) with opening the storage
compartment (page 48).
3. Firmly pull the prongs (2) from their grommets (3).
4. Slide the rear fender cover (4) forward to disengage the tabs (5).
5. Remove the rear fender cover.
Installation
Install the parts in the reverse order of removal.
(1) rubber strap
(2) prongs
(3) grommets
(4) rear fender cover
(5) tabs
(2)
(5)
(3)
(4)
(1)
20 TRX420TE FE-31HR38600.book 117 ページ 2019年4月25日 木曜日 午後3時39分
Summary of Contents for FourTrax Rancher TRX420FE1 2020
Page 10: ...20 TRX420TE FE 31HR38600 book 9 ページ 2019年4月25日 木曜日 午後3時39分 ...
Page 74: ...Before Riding 64 20 TRX420TE FE 31HR38600 book 64 ページ 2019年4月25日 木曜日 午後3時39分 ...
Page 250: ...Technical Information 240 20 TRX420TE FE 31HR38600 book 240 ページ 2019年4月25日 木曜日 午後3時39分 ...
Page 273: ...PRINTED IN USA WPCXXXX 2019 XX L 00X31 HR3 8600 31HR3860 ...