Servicing Your Honda
129
Engine Oil & Filter
3. Remove the oil filter cover (1) and O-rings (2) by removing the
bolts (3). Let the remaining oil drain out. Discard the oil filter (4)
in an approved manner (page 200).
4. Apply engine oil to a new O-rings and install them to the oil filter
cover and crankcase cover. Then install a new oil filter. Use only
the Honda Genuine oil filter or a filter of equivalent quality
specified for your model. Using the wrong Honda filter or a non-
Honda filter which is not of equivalent quality may cause engine
damage.
5. Reposition the spring (5) to the engine crankcase and install a
new oil filter with the rubber seal (6) facing out, away from the
engine. You will see the “OUTSIDE (TOWARDS FILTER COVER)”
mark (7) on the filter body, near the seal.
NOTICE
Improper installation of the oil filter can cause serious engine
damage.
(1)
(3)
(6)
(5)
(2)
(1) oil filter cover
(3) bolts
(5) spring
(6) rubber seal
(4)
(7)
(4) oil filter
(2) O-rings
(7) “OUTSIDE” mark
RIGHT SIDE
(2)
(1)
20 TRX420TE FE-31HR38600.book 129 ページ 2019年4月25日 木曜日 午後3時39分
Summary of Contents for FourTrax Rancher TRX420FE1 2020
Page 10: ...20 TRX420TE FE 31HR38600 book 9 ページ 2019年4月25日 木曜日 午後3時39分 ...
Page 74: ...Before Riding 64 20 TRX420TE FE 31HR38600 book 64 ページ 2019年4月25日 木曜日 午後3時39分 ...
Page 250: ...Technical Information 240 20 TRX420TE FE 31HR38600 book 240 ページ 2019年4月25日 木曜日 午後3時39分 ...
Page 273: ...PRINTED IN USA WPCXXXX 2019 XX L 00X31 HR3 8600 31HR3860 ...