background image

7

GENERATOR SAFETY

IMPORTANT SAFETY INFORMATION

Honda generators are designed for use with electrical equipment that has 
suitable power requirements. Other uses can result in injury to the operator or 
damage to the generator and other property.

Most injuries or property damage can be prevented if you follow all instructions 
in this manual and on the generator. The most common hazards are discussed 
below, along with the best way to protect yourself and others.

Operator Responsibility

• Never attempt to modify the generator. It can cause an accident as well as 

damage to the generator and appliances.

• Know how to stop the generator quickly in case of emergency.

• Understand the use of all generator controls, output receptacles, and 

connections.

• Be sure that anyone who operates the generator receives proper instruction. 

• Protect children by keeping them at a safe distance from the generator.

• Obey all applicable laws and regulations where the generator is used.

31Z266200.book  7 ページ  2020年2月20日 木曜日 午前11時12分

Summary of Contents for EB10000

























































































































Reviews: