ASSEMBLY
14
Handle Installation
Install the handle assembly on the generator upper frame using the 12 mm
washers, spring washers and handle holder bolts.
Torque:
19.5 lbf·ft (26.5 N·m, 2.7 kgf·m)
TO EXTEND HANDLE:
Raise the handle to the horizontal position. The handle will click into place when
locked.
Pressing down on the handles may damage the handle holder assembly. Only pull
up on the handles to move the generator.
HANDLE HOLDER BOLT (2)
SPRING WASHER (2)
12 mm WASHER (2)
HANDLE ASSEMBLY
HANDLE LEVER
HANDLE
31Z266200.book 14 ページ ２０２０年２月２０日 木曜日 午前１１時１２分
