Honda CRF250X, Owner'S Manual & Competition Handbook

Page: 122 / 180

116
Adjustments for Competition
Front Suspension Adjustments
19.Clean the threads of the fork protector bolts
(15) and axle holder thoroughly.
Apply locking agent to the bolt threads.
Install the fork protectors (16), fork protector
bolts, brake hose clamp bolts (17) and
tripmeter cable clamp bolt (18).
Tighten the fork protector bolts to the
specified torque:
5 Ibf·ft (7 N·m, 0.7 kgf·m)
20.Clean the surfaces where the axle and axle
clamps contact each other.
Install the left and right side collars into the
wheel hub. Insert the front axle shaft through
the wheel hub from the right side. Make sure
the front axle shaft is seated firmly onto the
left fork leg clamp inner surface. Tighten the
front axle nut (19) to the specified torque:
65 Ibf·ft (88 N·m, 9.0 kgf·m)
(19) front axle nut
21.Align the brake caliper (20) and hose with the
left fork leg, making sure that the brake hose
is not twisted.
22.Clean the threads of the caliper mounting
bolts (21) and brake caliper thoroughly.
Apply locking agent to the bolt threads.
Install the brake caliper on the slider and
tighten the caliper mounting bolts to the
specified torque:
22 Ibf·ft (30 N·m, 3.1 kgf·m)
An improperly routed brake hose may rupture
and cause a loss of braking efficiency. Route the
hose carefully.
Fit the brake caliper over the disc, taking care not
to damage the brake pads.
(20) caliper
(21) caliper mounting bolts
(18)
(16)
(15)
(15)
(17)
(19)
(21)
(20)
(15) fork protector bolts
(16) fork protectors
(17) brake hose clamp bolts
(18) tripmeter cable clamp bolt