Honda CRF250X, Owner'S Manual & Competition Handbook

Page: 113 / 180

Front Suspension Adjustments
Adjustments for Competition
107
(20) lower pinch bolts
15.Hold the outer tube (23), then remove the fork
damper (24) from the outer tube using the
lock nut wrench (25). Gently slide the outer
tube down onto the lower end of the slider
(26).
12.Clean the fork assembly, especially the sliding
surface of the slider (21) and dust seal (22).
The outer tube can drop on the slider and
damage the fork dust seal and guide bushing
when the fork damper is removed. To avoid
damage hold both the outer tube and slider when
removing the fork damper.
NOTICE
(21) slider (23) outer tube
(22) dust seal (24) guide bushing
13.Record the rebound damping adjuster position
and turn the adjuster counterclockwise until it
stops.
14.Measure the length (25) between the axle
holder and outer tube and record it before
disassembling the fork.
(23) outer tube (25) lock nut wrench
(24) fork damper (26) slider, lower end
16.Pour the fork oil from the outer tube (23).
Pour the fork oil from the oil hole (27) of the
fork damper.
(23) outer tube (27) oil hole
(25) length
(21)
(22)
(24)
(23)
(25)
(25)
(23)
(26)
(23)
(24)
(23) (27)
(14) fork protector bolts (17) fork protectors
(15) tripmeter cable clamp bolt (18) brake caliper bolts
(16) brake hose clamp bolts
(19) brake caliper
11.Loosen the fork leg lower pinch bolts (20),
then pull the fork legs down and out.
(17)
(15)
(16)
(18)
(19)
(14)
(14)
(18)
(20)
Do not support the brake caliper by the brake
hose. Do not operate the brake lever after the
front wheel is removed. To do so will cause
difficulty in fitting the brake disc between the
brake pads.
NOTICE
(cont’d)