78
Servicing Your Honda
Valve Clearance
3. Check that the rubber seals (4) are in good
condition, replace them if necessary.
Install the rubber seals onto the cylinder head
cover with the “UP” marks (5) facing up.
4. Install the cylinder head cover (6) and tighten
the cylinder head cover socket bolts (7) with
the rubber seals (4) to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
5. Install the ignition coil (8) and tighten the
ignition coil bolts (9) to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
Connect the ignition coil A connector (10) to
the blue terminal (11).
Connect the ignition coil B connector (12) to
the black terminal (13).
6. Install the spark plug (page 67).
7. Connect the spark plug cap (14) and breather
tube (15).
8. Install the fuel tank and seat (page 33, 35).
(4) rubber seals
(5) “UP” marks
(4) rubber seals
(6) cylinder head cover
(7) cylinder head cover socket bolts
(4)
(5)
(5)
(4)
(6)
(7)
(8) ignition coil
(9) ignition coil bolts
(10) ignition coil A connector
(11) blue terminal
(12) ignition coil B connector
(13) black terminal
(10)
(9)
(12)
(8)
(11)
(9)
(13)
(14) spark plug cap
(15) breather tube
(14)
(15)
