#
Cleaning and Lubricating
After inspecting the slack, clean the chain and
sprockets while rotating the rear wheel. Use a
dry cloth with high flash-point solvent. Use a
soft brush if the chain is dirty.
After cleaning, wipe dry and lubricate with the
recommended lubricant.
Recommended lubricant:
Drive chain lubricant
If not available, use SAE 80 or 90 gear
oil.
Never use petrol or low flash point solvents for
cleaning the drive chain.
A fire or explosion could result.
Avoid getting lubricant on the brakes or tyres.
Avoid applying excess chain lubricant to prevent
spray onto your clothes and the motorcycle.
Crankcase Breather
Service more frequently when riding in rain, at full
throttle, or after the motorcycle is washed or
overturned. Service if the deposit level can be seen in
the transparent section of the drain tube.
If the drain tube overflows, the air filter may
become contaminated with engine oil causing
20170928113120_32K84A000_eng_BOOK Page 45 Thursday, September 28 2017 11:34:27 JST
Maintenance Fundamentals
Maintenance
42
Summary of Contents for CRF150L
Page 1: ......
Page 114: ...20170928113120_32K84A000_eng_BOOK Page 113 Thursday September 28 2017 11 34 27 JST ...
Page 115: ......