Honda CBR250R Manual Download

Page: 82 / 91

Honda Motorcycle & Scooter India Pvt. Ltd.

CBR 250R

SPECIFICATIONS

DIMENSIONS

Overall length --------------------------------------- 2,030mm (79.9 in)

Overall width ---------------------------------------- 720 mm (28.3 in)

Overall height --------------------------------------- 1,127 mm (44.4 in)

Wheel base ------------------------------------------ 1,369 mm (53.9 in)

WEIGHT

Dry weight ------------------------------------------ 156 kg (344 lbs)

CAPACITIES

Engine oil

After draining --------------------- 1.4 L (1.5 US qt, 1.2 lmp qt)

After draining & oil filter change

- 1.5 L (1.6 US qt, 1.3 lmp qt)

After disassembly ----------------- 1.8 L (1.9 US qt, 1.6 lmp qt)

Fuel tank -------------------------------------------- 13.0 L (3.43 US gal, 2.86 lmp gal)

Cooling system capacity Full --------------------- 1.1 L (1.2 US qt, 1.0 lmp qt)

Exchange -------------- 0.79 L (0.83 US qt, 0.81 lmp qt)

Passenger capacity --------------------------------- Rider and one pillion rider

Maximum weight capacity -------------------------- 180 Kg (397 lbs)

ENGINE

Bore and stroke ------------------------------------ 76.0 x 55.0 mm (2.99 x 2.17 in)

Compression ratio ---------------------------------- 10.7:1

Displacement ---------------------------------------- 249.6 cm

(15.23 CU-in)

Spark plug ------------------------------------------ NGK SIMR8A9

Spark plug gap -------------------------------------- 0.8-0.9 mm (0.031-0.035 in)

Idle speed ------------------------------------------- 1,400 ± 100 min

-1

(rpm)

Valve clearance (Cold)

Intake ----------------- 0.16 ± 0.02 mm (0.006 in)

Exhaust

--------------- 0.27 ± 0.02 mm (0.011 in)

Summary of Contents for CBR250R




























































































Search results

Summary of Contents for CBR250R

Reviews:

Related manuals for CBR250R

Brands by name

Popular brands

Honda CBR250R, Manual

Search results

Summary of Contents for CBR250R

Reviews:

Related manuals for CBR250R

Brands by name

Popular brands