Honda CBR250R Manual Download

Page: 72 / 91

Honda Motorcycle & Scooter India Pvt. Ltd.

CBR 250R

Your battery is a maintenance-free type

and can be permanently damaged if the

cap strip is removed.

Rear Brake

Check the “Wear Indicator Grooves” (1) in

each pad.
If either pad is worn to the bottom of the

grooves, replace both pads as a set. Visit

your nearest Honda dealer for this service.
REAR BRAKE

BATTERY

Refer to the S

afety Precautions on page 45.

It is not necessary to check the battery

electrolyte level or add distilled water as

the battery is a m

aintenance-free (sealed)

type. If your battery seems weak and/or is

leaking electrolyte (causing hard starting

or other electrical troubles), contact your

Honda dealer or battery manufacturer.

NOTICE

(1) Wear indicator grooves

(1)

This symbol on the battery

means that this product must

not be treated as household

waste.

Battery contains lead, which is a hazardous

material and if improperly disposed,

can be harmful to the environment and

human health.

Always return the used maintenance-free

battery to the Honda dealer.

NOTICE

Summary of Contents for CBR250R




























































































Search results

Summary of Contents for CBR250R

Reviews:

Related manuals for CBR250R

Brands by name

Popular brands

Honda CBR250R, Manual

Search results

Summary of Contents for CBR250R

Reviews:

Related manuals for CBR250R

Brands by name

Popular brands