manualshive.com logo in svg

Honda CBR250R, Manual, Page: 11 / 91

Share
Download
Honda CBR250R Manual Download Page 11

Honda Motorcycle & Scooter India Pvt. Ltd.

5

CBR 250R

LOAD LIMITS AND GUIDELINES 

Your vehicle has been designed to carry you 

one pillion rider. When you carry a pillion 

rider, you may feel some difference during 

acceleration and braking. But so long as you 

keep your vehicle well- maintained, with 

good tyres and brakes, you can safely carry 

loads within the given limits and guidelines. 
However, ex

ceeding the weight limit or 

carrying an unbalanced load can seriously 

affect your vehicle’s handling, braking and 

stability. Non-Honda accessories, improper 

modifications,  and  poor  maintenance  can 

also reduce your safety margin. 

The  following  pages  give  more  specific 

information on loading, accessories and 

modifications. 
Loading 

How much weight you put on your vehicle, 

and how you load it, are important to your 

safety. Anytime you ride with a pillion 

rider or cargo you should be aware of the 

following information. 

!

WARNING

Overloading or improper loading can 

cause a crash and you can be seriously 

hurt or killed. 
Follow all load limits and other loading 

guidelines in this manual. 

Load Limits 

Following are the load limits for your 

vehicle: 

Maximum weight capacity: 

180 kg (397 lbs)

 

Includes the weight of the rider, pillion 

rider, all cargo and all accessories 

LOADING GUIDELINES 

Your vehicle is primarily intended for 

transporting you and a pillion rider. You 

may wish to secure a jacket or other small 

items to the seat when you are not riding 

with a pillion rider. If you wish to carry more 

cargo, check with your Honda dealer for 

advice, and be sure to read the information 

regarding accessorie

s on page 6

. 

Summary of Contents for CBR250R




























































































Reviews:

No comments