Honda Motorcycle & Scooter India Pvt. Ltd.
51
CBR 250R
Changing the oil filter requires a torque
wrench. If you do not have it and the
necessary skill, we recommend that you have
your Honda dealer perform this service.
If a torque wrench is not used for this
installation,
visit your nearest
Honda dealer
as soon as possible to verify proper assembly.
Change the engine oil with the engine at
normal operating temperature and the
vehicle on its side stand to assure complete
and rapid draining.
1. Place a drain pan under the crankcase.
2.
To drain the oil, remove the oil filler cap, “Oil
Drain Bolt” (1) and “Sealing Washer”
(2).
(1) Oil Drain Bolt
(2) Sealing Washer
(1)
(2)
3. Remove the right under cowl (page 36).
4. Remove the “Oil Filter Cover” (3),
“Gasket” (4) “Spring” (5) and “Oil Filter”
(6), by removing the “Oil Filter Cover
Bolt” (7).
5. Install the new oil filter with the ‘‘OUT-
SIDE Mark” (8) facing out.
(3) Oil Filter Cover
(4) Gasket
(5) Spring
(6) Oil Filter
(7) Oil Filter Cover Bolt
(8) ‘‘OUT-SIDE’’ Mark
(3)
(6)
(5)
(4)
(7)
(8)
