Honda CB500F 2019 Manual Download

Page: 122 / 161

Remove the brake caliper bracket, rear

wheel and side collars.

Support the brake caliper assembly so

that it doesn’t hang from the brake

hose. Do not twist the brake hose.

Avoid getting grease, oil, or dirt on the

disc or pad surfaces.

Do not push the brake pedal while the

wheel is removed.

Installation

To install the rear wheel, reverse the

removal procedure.

Take care to prevent the brake caliper

from scratching the wheel during

installation.

NOTICE

When installing a wheel or caliper into original

position, carefully fit the brake disc between the

pads to avoid scratching them.

20181219111032_31MKPB000_enu_BOOK Page 123 Wednesday, December 19 2018 11:25:27 JST

Tire Puncture

Removing Wheels

Troubleshooting

120

Summary of Contents for CB500F 2019


































































































































































Search results

Summary of Contents for CB500F 2019

Reviews:

Related manuals for CB500F 2019

Brands by name

Popular brands

Honda CB500F 2019, Manual

Search results

Summary of Contents for CB500F 2019

Reviews:

Related manuals for CB500F 2019

Brands by name

Popular brands