Honda CB500F 2019 Manual Download

Page: 16 / 161

Accessories &

Modifications

We strongly advise that you do not add any

accessories that were not specifically designed

or approved for your motorcycle by Honda or

make modifications to your motorcycle from its

original design. Doing so can make it unsafe.

Modifying your motorcycle may also void your

warranty and make your motorcycle illegal to

operate on public roads. Before deciding to

install accessories on your motorcycle be certain

the modification is safe and legal.

WARNING

Improper accessories or modifications

can cause a crash in which you can be

seriously hurt or killed.

Follow all instructions in this owner's

manual regarding accessories and

modifications.

Do not pull a trailer with, or attach a sidecar to,

your motorcycle. Your motorcycle was not

designed for these attachments, and their use

can seriously impair your motorcycle's handling.

20181219111032_31MKPB000_enu_BOOK Page 17 Wednesday, December 19 2018 11:25:27 JST

Accessories & Modifications

Motorcycle Safety

Summary of Contents for CB500F 2019


































































































































































Search results

Summary of Contents for CB500F 2019

Reviews:

Related manuals for CB500F 2019

Brands by name

Popular brands

Honda CB500F 2019, Manual

Search results

Summary of Contents for CB500F 2019

Reviews:

Related manuals for CB500F 2019

Brands by name

Popular brands