Honda Amaze 2018 Owner'S Manual Download Page 78

Page: 78 / 328

Indicators

strum

ent Pa

nel

*1:Models with the keyless access system have an

ENGINE START/STOP

button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Seat Belt
Reminder
Indicator

●

Blinks and the beeper sounds for a few
seconds if you are not wearing a seat belt
when you turn the ignition switch to ON

(

then the indicator comes on.

●

Blinks while driving if you have not fastened a
seat belt. The beeper sounds and the indicator
blinks at regular intervals.

●

The beeper stops and the indicator goes off
when you fasten your seat belt.

●

Stays on after you have fastened the seat
belt

- A detection error may have occurred in

the sensor. Have the vehicle checked by a
dealer.

Seat Belt Reminder

P. 32

Low Fuel
Indicator

●

Comes on when the fuel reserve is running
low (approximately 4.8 Litres left).

●

Blinks if there is a problem with the fuel
gauge.

●

Comes on

- Refuel your vehicle as soon as

possible.

●

Blinks

- Have the vehicle checked by a dealer.

●

The fuel gauge dot disappeared.

●

Even if you depress the accelerator pedal, the
engine speed (RPM) will not increase.

●

Refuel your vehicle as soon as possible then
restart the engine. The vehicle speed limit will
be released when refueling 10.0 Litres or
more.

Refueling

P. 224

Diesel models

2UA_Manual_ 30-03-18.indd 79

4/5/2018 3:04:36 PM

Summary of Contents for Amaze 2018








































































































































































































































































































































Search results

Summary of Contents for Amaze 2018

Reviews:

Related manuals for Amaze 2018

Brands by name

Popular brands

Honda Amaze 2018, Owner'S Manual

Search results

Summary of Contents for Amaze 2018

Reviews:

Related manuals for Amaze 2018

Brands by name

Popular brands