Honda Amaze 2018 Owner'S Manual Download Page 208 | Manualshive

Page: 208 / 328

background image

uu

When Driving

u

Shifting

206

Driving

■

Shift Lever Operation

1

Shift Lever Operation

NOTICE

When you change the shift lever from

(

D

to

(

R

and

vice versa, come to a complete stop and keep the
brake pedal depressed.
Operating the shift lever before the vehicle has come
to a complete standstill can damage the transmission.

Use the shift lever position indicator to check the
lever position before pulling away.

If the transmission indicator blinks when driving, in
any shift position, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.

The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer's red zone (engine
speed limit). If this happens, you may experience a
slight jolt.

It may not be possible to operate the shift lever if the
brake pedal is applied while the shift lever release
button is held down.
Depress the brake pedal first.

When shifting positions in extremely low
temperatures (-30°C), there may be a short delay
before the shift position is displayed. Always confirm
you are in the correct shift position before driving.

Depress the brake pedal and
press the shift lever release button to shift.

Shift without pressing the shift lever
release button.

Press the shift lever release button and
shift.

Tachometer’s red zone

Shift Lever Position Indicator (Transmission Indicator)

Models without keyless access system

Petrol models

Diesel models

2UA_Manual_ 30-03-18.indd 209

4/5/2018 3:05:16 PM

«
...
206
207
208
209
210
...
»

Summary of Contents for Amaze 2018









































































































































































































































































































































Reviews:

No comments

Related manuals for Amaze 2018

Brand: CAMPARK Pages: 20

Brand: FABBRI PORTATUTTO Pages: 2

Brand: FORM FIT Pages: 2

Brand: BrandMotion Pages: 8

FIX&GO automatic

Brand: Alfa Romeo Pages: 40

Brand: CITROËN Pages: 301

Green Motion DC 66

Brand: Eaton Pages: 18

Brand: Whispbar Pages: 15

Brand: Audiovox Pages: 24

Brand: Mercedes-Benz Pages: 2

Brand: Westin Pages: 2

Brand: Toyota Pages: 600

Brand: Brodit Pages: 2

Brand: Vangear Pages: 5

Brand: Safe Fleet Pages: 20

Brand: JBL Pages: 12

Brand: TATA Motors Pages: 166

Brand: Advanced Diagnostics Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands