Honda Amaze 2018 Owner'S Manual Download Page 289

Page: 289 / 328

Continued

287

If a Tyre Goes Flat

Changing a Flat Tyre

Han

dlin

g the U

expected

Raise the vehicle, using the jack handle bar
and the jack handle, until the tyre is off the
ground.

Jack Handle
Bar

Wheel Nut Wrench as Jack Handle

How to Set Up the Jack

Do not use the jack with people or luggage in the
vehicle.

Use the jack provided in your vehicle.
Other jacks may not support the weight (“load”) or
may not fit the jacking point.

The following instructions must be followed to use
the jack safely:

•

Do not use while the engine is running.

•

Use only where the ground is firm and level.

•

Use only at the jacking points.

•

Do not get in the vehicle while using the jack.

•

Do not put anything on top of or underneath the
jack.

2UA_Manual_ 30-03-18.indd 290

4/5/2018 3:05:40 PM

Summary of Contents for Amaze 2018








































































































































































































































































































































Search results

Summary of Contents for Amaze 2018

Reviews:

Related manuals for Amaze 2018

Brands by name

Popular brands

Honda Amaze 2018, Owner'S Manual

Search results

Summary of Contents for Amaze 2018

Reviews:

Related manuals for Amaze 2018

Brands by name

Popular brands