Honda 2013 Civic Sedan Owner'S Manual Download Page 60

Page: 60 / 368

Child Safety

Safety of Infants and Small Children

Safe D

riv

Make sure the child seat is firmly secured by
rocking it forward and back and side to
side; little movement should be felt.

Make sure any unused seat belt that a child
can reach is buckled, the lockable retractor
is activated, and the belt is fully retracted
and locked.

Installing a Child Seat with a Seat Belt

To deactivate a lockable retractor, release the buckle
and allow the seat belt to wind up all the way.

Summary of Contents for 2013 Civic Sedan

















































































































































































































































































































































































Search results

Summary of Contents for 2013 Civic Sedan

Reviews:

Related manuals for 2013 Civic Sedan

Brands by name

Popular brands

Honda 2013 Civic Sedan, Owner'S Manual

Search results

Summary of Contents for 2013 Civic Sedan

Reviews:

Related manuals for 2013 Civic Sedan

Brands by name

Popular brands