Honda 2013 Civic Sedan Owner'S Manual Download Page 218

Page: 218 / 368

216

Before Driving

Driving Preparation

Dr
ivi
ng

•

Be sure items placed on the floor behind the front seats cannot roll under the
seats.

They can interfere with the driver's ability to operate the pedals, the operation
of the seats, or the operation of the sensors under the seats.

•

Everyone in the vehicle must fasten their seat belt.

Fastening a Seat Belt

P. 33

•

Make sure that the indicators in the instrument panel come on when you start the
vehicle, and go off soon after.

Always have a dealer check the vehicle if a problem is indicated.

Indicators

P. 66

Summary of Contents for 2013 Civic Sedan

















































































































































































































































































































































































Search results

Summary of Contents for 2013 Civic Sedan

Reviews:

Brands by name

Popular brands

Honda 2013 Civic Sedan, Owner'S Manual

Search results

Summary of Contents for 2013 Civic Sedan

Reviews:

Brands by name

Popular brands