manualshive.com logo in svg

Honda 2013 Civic Sedan, Owner'S Manual, Page: 330 / 368

Share
Download
Honda 2013 Civic Sedan Owner'S Manual Download Page 330

uu

If a Tire Goes Flat

u

Temporarily Repairing a Flat Tire

328

Hand

lin
g t
h

e U

n

exp

e

ct

ed

You can use the kit to inflate a non-punctured under-inflated tire.

1.

Open the trunk floor lid.

2

Getting Ready to Temporarily Repair 
the Flat Tire

 P. 322

2.

Remove the kit from the case.

u

Place the kit on flat ground near the tire 
to be inflated, away from traffic.

3.

Place the kit, face up, on flat ground near 
the flat tire, away from traffic. Do not 
place the kit on its side.

4.

Remove the air only hose from the kit.

5.

Remove the valve cap.

6.

Attach the air only hose onto the tire valve 
stem. Screw it until it is tight.

■

Inflating An Under-inflated Tire

1

Inflating An Under-inflated Tire

NOTICE

Do not operate the temporary tire repair kit 
compressor for more than 15 minutes. The accessory 
power socket and compressor can overheat and 
become permanently damaged.

Air Only Hose

Valve Cap

Valve Stem

Air Only Hose

Summary of Contents for 2013 Civic Sedan

















































































































































































































































































































































































Reviews:

No comments