Honda 2013 Civic Sedan Owner'S Manual Download Page 325

Page: 325 / 368

Continued

323

If a Tire Goes Flat

Temporarily Repairing a Flat Tire

Hand

lin
g t
h

e U

exp

Open the trunk floor lid.

Take the kit out of the case.

Place the kit face up, on flat ground near
the flat tire, and away from traffic. Do
not place the kit on its side.

Getting Ready to Temporarily Repair the Flat Tire

When making a temporary repair, carefully read the
instruction manual provided with the kit.

In cold temperatures, the sealant may not flow easily.
In this situation, warm it up for five minutes before
using.

Summary of Contents for 2013 Civic Sedan

















































































































































































































































































































































































Search results

Summary of Contents for 2013 Civic Sedan

Reviews:

Brands by name

Popular brands

Honda 2013 Civic Sedan, Owner'S Manual

Search results

Summary of Contents for 2013 Civic Sedan

Reviews:

Brands by name

Popular brands