Honda 2011 ACCORD SEDAN Owner'S Manual Download Page 86

Page: 86 / 454

CONTINUED

The auto door unlocking is
deactivated all the time.

The auto door unlocking feature
has five possible settings:

Make sure the shift lever is in the
Park (P) position (A/T vehicles).

Turn the ignition switch to the ON
(II) position, and open the driver’s
door.

The driver’s door unlocks
whenever you turn the ignition
switch to the ACCESSORY (I)
position.

This is the default setting on M/T
vehicles.

All doors unlock whenever you
turn the ignition switch to the
ACCESSORY (I) position.

the driver’s door

unlocks when you move the shift
lever to the Park (P) position with
the brake pedal depressed.
This is the default setting.

All doors unlock when you move
the shift lever to the Park (P)
position with the brake pedal
depressed (A/T vehicles).

On A/T vehicles,

Door Locks

Auto Door Unlocking

To turn of f the Auto Door Unlock
modes:

Inst

nt
s

Cont

10/06/18 15:52:58 31TA5630_088

2011 Accord Sedan

Summary of Contents for 2011 ACCORD SEDAN







































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 ACCORD SEDAN

Reviews:

Related manuals for 2011 ACCORD SEDAN

Brands by name

Popular brands

Honda 2011 ACCORD SEDAN, Owner'S Manual

Search results

Summary of Contents for 2011 ACCORD SEDAN

Reviews:

Related manuals for 2011 ACCORD SEDAN

Brands by name

Popular brands