Honda 2011 ACCORD SEDAN Owner'S Manual Download Page 231

Page: 231 / 454

Install the dock connector to the
USB adapter cable securely.

Connect your dock connector to
the iPod correctly and securely.

Pull out the USB connector from
the holder.

Some devices cannot be powered
or charged via the USB adapter. If
this is the case, use the accessory
adapter to supply power to your
device.

We recommend backing up your
data before playing it.

Do not use an extension cable
between the USB adapter cable
equipped with your vehicle and
your dock connector.

Do not keep the iPod in the
vehicle. Direct sunlight and high
heat will damage it.

Do not connect your iPod using a
hub.

Use only compatible iPods with the
latest software. iPods that are not
compatible will not work in this audio
unit.

Connecting an iPod

Playing an iPod (Models with navigation system)

228

NOTE:

USB ADAPTER CABLE

DOCK CONNECTOR

USB CONNECTOR

10/06/18 16:11:45 31TA5630_233

2011 Accord Sedan

Summary of Contents for 2011 ACCORD SEDAN







































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 ACCORD SEDAN

Reviews:

Related manuals for 2011 ACCORD SEDAN

Brands by name

Popular brands

Honda 2011 ACCORD SEDAN, Owner'S Manual

Search results

Summary of Contents for 2011 ACCORD SEDAN

Reviews:

Related manuals for 2011 ACCORD SEDAN

Brands by name

Popular brands