REARVIEW CAMERA
(models with navigation)
How It Works
• When you shift into Reverse (R), a real-time image
of the area behind your vehicle is shown in the
navigation display, along with helpful parking guide
lines.
• Turn the guide lines off by pressing and holding
CANCEL for about 3 seconds.
• The display turns off when you shift out of Reverse.
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
DRIVING POSITION MEMORY SYSTEM (DPMS) (if equipped)
Store a driver's seat and mirror position into memory for each remote transmitter.
Programming DPMS
Note:
A stored memory position is linked to the corresponding keyless remote (1 or 2).
Each item begins to adjust when you unlock the driver’s door with the remote and enter
the vehicle.
1.
Turn
the vehicle on.
Shift
into
Park (P)
.
2.
Adjust
your preferred seat and
outside mirror settings.
3.
Press and hold
the SET button
until you hear a beep, then release.
4.
Press and hold
the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
8
9
REVERSE TILT DOOR MIRRORS
When you shift into Reverse (R), you can tilt either outside door mirror down slightly
to improve your view as you parallel park. Shifting out of Reverse returns the tilted
mirror to its original position.
How It Works
• To tilt the driver’s door
mirror,
move
the
mirror selector switch
to the left (L) position.
• To tilt the passenger’s
side door mirror,
move
the mirror selector
switch to the right (R)
position.
• To turn the feature off,
move
the switch to the
middle position.
11 Crosstour TRG:ATG_NEW STYLE
8/31/2010
2:59 PM
Page 6
