Honda 2009 NSA700A, Owner'S Manual

Page: 142 / 284

−
−
18 lbf·ft (25 N·m , 2.5 kgf·m)
3.5 US qt (3.3 )
135
Engine Oil & Filter
Servicing Your Honda
Add Engine Oil:
Check the condition of the sealing
washer on the engine oil drain bolt.
Replace the washer every other time the
oil is changed.
Install the engine oil drain bolt and
tighten it to the specified torque:
Fill the crankcase with the
recommended oil (page
),
approximately:
Install the oil filler cap.
Start the engine and let it idle for 3 5
minutes.
Stop the engine and wait 2 3 minutes.
Hold the motorcycle upright and check
that the oil level is at the upper level
mark on the dipstick (page
).
Check that there are no oil leaks.
Install the right under cowl (page
).
Install the right side cover (page ).
If a torque wrench is not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
111
126
117
129
15.
16.
17.
18.
19.
20.
21.
22.
23.
０８／１１／２４ １４：２８：００ ３１ＭＥＨ６００ ０１４４