CONTINUED
Your vehicle has halogen headlight
bulbs. When replacing a bulb, handle
it by its base, and protect the glass
from contact with your skin or hard
objects. If you touch the glass, clean
it with denatured alcohol and a clean
cloth.
Remove the electrical connector
from the bulb by pulling the
connector straight back.
Remove the rubber weather seal
by pulling on the tab.
Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way, and remove the bulb.
The headlights were properly aimed
when your vehicle was new. If you
regularly carry heavy items on the
pickup bed or pull a trailer,
readjustment may be required.
Adjustments should be done by your
dealer or other qualified mechanic.
1.
2.
3.
Headlight Aiming
Replacing a Headlight Bulb
Lights
Ma
int
e
na
nce
245
WEATHER SEAL
CONNECTOR
HOLD-DOWN WIRE
BULB
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.
０４／１２／０３ １６：５６：３６ ３１ＳＪＣ６００ ０２５０
Main Menu
Table of Contents
▲
▼
