−
−
−
The SCAN function
samples all the tracks on the
selected disc in the order they are
recorded. To activate it, press and
release the SCAN button. You will
see SCAN in the display, and you will
get a 10 second sampling of each
track on the selected CD. Press the
SCAN button again to get out of scan
mode.
You can also play 3-inch (8-cm) discs
without using an adapter ring.
With the ignition in the
ACCESSORY (I) or ON (II) position,
insert a CD about halfway into the
CD slot. The drive will pull the CD in
the rest of the way and begin to play
it. You operate the CD player with
the same controls used for the radio.
The number of the track playing is
shown in the display. The system will
continuously play a CD until you
change modes.
Push the
side of the SEEK/
SKIP bar to play the next track on
the disc. Push the
side once to
replay the track in play; press it twice
to replay the previous track.
To move rapidly within a track, press
and hold the
or the
side
of the bar.
Press the RPT button
to continuously replay a track. You
will see RPT in the display. Press the
RPT button again to turn it off.
Press the RDM
button to play the tracks in random
order. You will see RDM in the
display. Press the RDM button again
to return to normal play.
RT and Canadian LX models
To Change Tracks
SCAN
CD Player
REPEAT
RANDOM
Playing a CD, CD Changer
Fe
a
tu
re
s
149
Do not use CDs with adhesive labels.
The label can curl up and cause the CD
to jam in the unit.
０４／１２／０３ １６：４０：０６ ３１ＳＪＣ６００ ０１５４
Main Menu
Table of Contents
▲
▼
