Honda 2006 FourTrax Foreman Rubicon Owner'S Manual Download

Page: 151 / 301

(1)

(2)

(5)

(3)

(1) seat lock lever
(2) seat
(3) prongs

(4) hooks
(5) studs
(6) grommets

(5)

(4)

(3)

(6)

(4)

142

Seat Removal

Servicing Your Honda

Saf ety Precautions

Refer to

on page

Press down on the seat until locks.

Installation

Slide the seat ( ) back and lift it.

Removal

Pull the seat lock lever ( ) at the right side of the seat.

The seat must be removed for the air cleaner, spark plug, battery and
fuse maintenance.

Insert the prongs ( ) into the hooks ( ) on the frame and press the
studs ( ) into the grommets ( ).

1.
2.

131

05/06/08 11:06:13 31HN2650_151

Summary of Contents for 2006 FourTrax Foreman Rubicon














































































































































































































































































































Search results

Summary of Contents for 2006 FourTrax Foreman Rubicon

Reviews:

Related manuals for 2006 FourTrax Foreman Rubicon

Brands by name

Popular brands

Honda 2006 FourTrax Foreman Rubicon, Owner'S Manual

Search results

Summary of Contents for 2006 FourTrax Foreman Rubicon

Reviews:

Related manuals for 2006 FourTrax Foreman Rubicon

Brands by name

Popular brands