−
(1)
(3)
(4)
(1) dipstick
(2) oil tank
(3) upper level mark
(4) lower level mark
(5) oil filler cap
(5)
(2)
RIGHT SIDE
150
Engine Oil & Filter
Servicing Your Honda
To check the oil level
Running the engine with an improper oil level can cause serious engine
damage.
Park your ATV on a firm, level surface.
Reinstall the oil filler cap and dipstick.
If required, remove the oil filler cap ( ) and add the specified oil into
the oil filler cap hole, up to the upper level mark on the dipstick. Do
not overfill.
Insert the dipstick without screwing it in, then remove the dipstick and
check the oil level. The oil level should be between the upper level
mark ( ) and the lower level mark ( ) on the dipstick.
Remove the dipstick ( ) from the oil tank ( ) and wipe it clean.
Start the engine in a well-ventilated area and let it idle for 5 minutes.
If the air temperature is below 10 °C (50 °F), let the engine idle for an
additional 5 minutes (a total of 10 minutes).
An engine that is not warmed sufficiently may give an inaccurate
(low) oil level reading.
Stop the engine and wait 2
3 minutes. If the oil is checked while
engine is hot, you will get an inaccurate oil level reading.
6.
4.
5.
7.
8.
9.
1
3
5
4
2
10.
05/06/08 11:07:38 31HN2650_159
Summary of Contents for 2006 FourTrax Foreman Rubicon
