40
Remove the cylinder head bolts.
Loosen the cylinder bolt.
Position the piston at top dead center on the compres-
sion stroke (page 30).
Remove the cam shaft holder assembly (page 32).
Loosen the radiator hose clamp and disconnect the ra-
diator hose.
(1) RADIATOR HOSE CLAMP
(2) RADIATOR HOSE
Remove the engine hanger nut, engine hanger A bolt,
right collar, left collar and fuel hose guide.
Remove the engine hanger B bolts, left engine hanger
plate and right engine hanger plate.
(1) ENGINE HANGER NUT
(2) ENGINE HANGER A BOLT
(3) RIGHT COLLAR
(4) LEFT COLLAR
(5) FUEL HOSE GUIDE
(6) ENGINE HANGER B BOLTS
(7) LEFT ENGINE HANGER PLATE
(8) RIGHT ENGINE HANGER PLATE
(1) CYLINDER HEAD BOLTS
(2) CYLINDER BOLT
Remove the cylinder head nuts, washers and the cylin-
der head.
CAUTION:
•
Do not let the nuts, washers and cam chain fall into
the crankcase.
NOTE:
•
Loosen the nuts in a criss-cross pattern in 2 or 3
steps.
(1) CYLINDER HEAD NUTS/WASHERS
(2) CYLINDER HEAD
4. SERVICE AND MAINTENANCE
