30
VALVE
Cylinder Head Cover Removal
NOTE:
•
Before inspection, clean the engine thoroughly to
keep dirt from entering the engine.
Remove the seat (page 17).
Remove the fuel tank (page 17).
Disconnect the breather tube and spark plug cap.
Connect the brake pedal return spring if it was re-
moved.
Lubricate the rear brake pedal pivot and pivot bolt and
tighten the pivot bolt.
TORQUE: 20 lbf
･
ft (26 N
･
m, 2.7 kgf
･
m)
(1) BRAKE PEDAL
(2) PIVOT BOLT
(3) RETURN SPRING
Add the transmission oil (page 23).
(1) BREATHER TUBE
(2) SPARK PLUG CAP
Remove the cylinder head cover A bolt, cylinder head
cover B bolts and cylinder head cover.
Positioning At Top Dead Center On The Compression
Stroke.
Remove the crankshaft hole cap.
(1) CYLINDER HEAD COVER A BOLT
(2) CYLINDER HEAD COVER B BOLTS
(3) CYLINDER HEAD COVER
(1) CRANKSHAFT HOLE CAP
Remove the spark plug.
(1) SPARK PLUG
4. SERVICE AND MAINTENANCE
