Changing a Flat Tire
13.Tighten the wheel nuts securely
in the same crisscross pattern.
Have the wheel nut torque check-
ed at the nearest automotive
service facility.
Tighten the wheel nuts to:
110 N.m(11 kg-m,80 Ib-ft)
14.Remove the wheel cover or
center cap.
Place the flat tire face down in
the spare tire well.
15.Remove the spacer cone from
the wing bolt, turn it over, and
put it back on the bolt.
16.Secure the flat tire by screwing
the wing bolt back into its hole.
17.Store the jack and tool kit back
in the spare tire well.
18.Store the wheel cover or center
cap in the trunk. Make sure they
do not get scratched or damaged.
Taking Care of the Unexpected
WING BOLT
SPACER
CONE
Main Menu
Table of Contents
▲
▼