Lights
3. Remove the rubber weather seal
by pulling on the tab.
4. Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way and remove the bulb.
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place and clip the end
into the slot.
6. Push the rubber weather seal
over the bulb. Make sure the tab
is on the top.
7. Push the electrical connector
onto the tabs of the new bulb.
Turn on the headlights to test
the new bulb.
8. (Passenger's side)
Reinstall the air intake tube.
Replacing the Front Side
Marker/Turn Signal and
Parking Light Bulb
1. Use a Phillips-head screwdriver
to remove the screw from the top
of the fender.
2. Move the side marker light
assembly forward until it slides
out of the body.
3. Turn the socket one-quarter turn
counterclockwise to remove it
from the lens.
Maintenance
SCREW
Main Menu
Table of Contents
▲
▼
