Honda 1991 Civic Online Reference Owner'S Manual Download Page 98

Page: 98 / 124

Spare Tire

COMPACT Spare Tire

Your car is supplied with a COMPACT spare tire and wheel for

temporary use only in the event of a flat tire. Use the COMPACT

spare only when you have t o , and only to go as far as the next

garage or dealer to have the regular tire repaired and reinstalled.

Because you will rarely use the COMPACT spare, be sure to
regularly check its condition and air pressure (415 kPa, 60 psi), so it

will be ready when you need it. This type of tire holds less air at
higher pressure than a regular tire, so it will inflate (or deflate if there
is a leak) more rapidly; check its pressure often and add air gradually
if it needs any.

The COMPACT spare tire has a

different tire size, air pressure re-
quirement, tread life and maxi-

mum speed rating than the four

regular tires on your car. Disre-
garding these warnings may re-
sult in tire failure, loss of vehicle

control and possible injury to

vehicle occupants.

Do not exceed 50 mph (80 km/h)
under any circumstances when
using the COMPACT spare.
Do not mount snow chains on

the COMPACT spare. They will

not fit properly and will damage the tire and possibly your car. If
you must use the COMPACT spare when driving on roads

covered with snow or ice, use it as one of the rear tires and

mount chains only on the front two regular tires.

(cont'd)

Main Menu

▲

▼

Summary of Contents for 1991 Civic





























































































































Search results

Summary of Contents for 1991 Civic

Reviews:

Related manuals for 1991 Civic

Brands by name

Popular brands

Honda 1991 Civic, Online Reference Owner'S Manual

Search results

Summary of Contents for 1991 Civic

Reviews:

Related manuals for 1991 Civic

Brands by name

Popular brands