Honda 1991 Civic Online Reference Owner'S Manual Download Page 15 | Manualshive

Page: 15 / 124

background image

Seat Belts (cont'd)

Child Restraint

Children riding in the car should be restrained to minimize the risk of
injury in an accident, sudden stop or sudden maneuver.

According to accident statistics provided to the National Highway

Traffic Safety Administration (NHTSA), children are safer when

properly restrained in the rear seating positions than in the front

seat.

For smaller children, we strongly recommend the use of a

commercially available child restraint system that meets the Federal

Motor Vehicle Safety Standard (FMVSS) because it offers the most
protection against injury. All states now have laws which require

that small children must be seated in a child passenger seat restraint

system. Check local laws.

Before buying a particular child restraint system, make sure it fits

your car seat and seat belts, and fits your child. Follow the child seat

manufacturer's instructions when installing the child seat.

Children who have outgrown the child restraint system should use

one of the seat belts.

Make sure the belt is snug against the child's body with the

shoulder portion going over the shoulder and across the body to

evenly distribute the belt's restraining force.

Check that the lap portion of the belt is positioned low on the

child's hipbone and below the abdomen.
This way if the car is involved in an accident, the child will be less

likely to slide under the seat belts.

If the belt is too close to the child's neck or throat, you may want

to consider putting the child in an automobile booster seat that

meets the Federal Motor Vehicle Safety Standard (FMVSS).

Children should never ride unrestrained in an automobile.
Never use an infant carrier or child safety seat that "hooks"
over a seat-back; it may not provide adequate security in an
accident.
Never allow a child to be held in a person's arms while they are
in a moving vehicle. Holding a child in a moving vehicle does not

provide the child with any means of protection during an

accident, even if the person holding the child is wearing a seat
belt.

Main Menu

▲

▼

«
...
13
14
15
16
17
...
»

Summary of Contents for 1991 Civic





























































































































Reviews:

No comments

Related manuals for 1991 Civic

Brand: cam Pages: 28

Brand: Barker Pages: 2

Brand: iDataLink Pages: 99

Brand: FormFit Pages: 2

Brand: Safe Fleet Pages: 38

Brand: Brodit Pages: 2

Brand: Power Fist Pages: 12

Brand: EAL Pages: 7

Brand: Nav TV Pages: 2

2010 Civic Sedan

Brand: Honda Pages: 390

Truck Training Model

Brand: WABCO Pages: 56

Brand: travall Pages: 2

Brand: Gacell Pages: 12

Park Vision VAL632210

Brand: Valeo Pages: 25

ULTIMATE SPEED 296713

Brand: walser Pages: 10

Brand: Mercedes-Benz Pages: 373

Security Cage Kit

Brand: Toro Pages: 8

Brand: Peiying Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands