8 of 14
AII01797-23 (1504)
© 2015 American Honda Motor Co., Inc. – All Rights Reserved.
15. Pull away the door opening seal, and remove the
driver’s front door sill trim (one clip and six retaining
tabs).
16. Pull away the door opening seal, and remove the
driver’s kick panel (two clips).
QD40319AJ
3 RETAINING
TABS
3 RETAINING
TABS
CLIP
DRIVER’S FRONT
DOOR SILL TRIM
DOOR OPENING
SEAL
(Pull away.)
QD40320AJ
DOOR OPENING
SEAL
(Pull away.)
DRIVER’S
KICK PANEL
2 CLIPS
17. Using isopropyl alcohol on a shop towel, clean the
vehicle panel where the urethane tape will attach.
18. Using scissors, cut one urethane tape in half. Attach
one half of urethane tape to the vehicle panel as
shown. Be careful not to crease the headliner.
QD42306AJ
HALF OF
URETHANE
TAPE
VEHICLE PANEL
(Clean with
isopropyl alcohol.)
SECTION VIEW
VEHICLE
PANEL
Align the center
of urethane tape
with the center of
the mirror mount.
MIRROR
MOUNT
URETHANE TAPE
(Cut in half.)
HEADLINER
HALF OF
URETHANE
TAPE
FRONT
